I recently purchased a JBL speaker and was excited to start using it, but I noticed that it wasn’t charging fully. I tried using different outlets and charging cables, but the issue persisted.
I was disappointed and frustrated, as I had just spent a lot of money on this speaker and now it seemed like it wasn’t working properly.
I knew I had to find a solution, so I started doing some research and troubleshooting to figure out why my JBL speaker was not charging fully.
In this article, you will know the possible reasons for this problem and their easy solutions. So, stay with us!
JBL Speaker Not Charging Fully
There can be several reasons why your JBL speaker is not charging fully, including a faulty charging cable, a damaged battery or battery wire, software issues, or problems with the circuit board. To troubleshoot the problem, try replacing the charging cable, replacing the battery, resetting the speaker, updating the software, or taking the speaker to a technician if the problem is with the circuit board.
If you did not understand or need more detail then read on.
1. Charging Cable
The charging cable can be faulty. It happens when your charging cable is broken from different places in isolation. It looks alright but the wire is broken from the inside.
These breakages can hold the charging but at a certain point, it starts to lose charging. So, that is why your speaker is not fully charged.
You need to replace the charging cable. You have to stay focused and check the battery percentage how much it can charge and where it stops or starts to loosen the charging.
By replacing the wire, your speaker will start charging properly.
2. Battery
The battery can also be the reason for this problem. It can also be possible that the battery has lost its capacity of storing power.
It can become used for damage to the battery. So, in this situation, you need to replace the battery. Try to replace the battery with the same brand battery.
It can also be possible that the connecting wire of the charging port and battery has a fault. It can also stop charging at a certain point.
The power can start to loosen because of damage to the wire. So, if the battery is alright, it can be the fault of connecting the wire.
Check both things. If you can open the speaker, open it and check. Otherwise, take it to the technician for proper checking.
3. Resetting
The software can also create problems. The audio source you are using can be contaminated with bugs or viruses. These are enemies of software.
So, it can also be possible that the problem is with the software. These things can create this problem. So, in this situation, the only solution is resetting.
The resetting will wipe out all the data along with these bugs. So, the following are the steps you need to follow for resetting your speaker:
- Turn on your JBL speaker.
- Press the volume up and play buttons at the same time and hold them at least for 10-20 seconds or until the status light turns off.
- Your speaker will be off.
- Restart it after several seconds, it will be reset.
4. Software Updation
Sometimes outdated software starts creating problems. Every device works well when we keep it up to date.
So, it can also be the reason that the new version of the software is available and you haven’t installed it yet.
So, you need to update the software of the speaker. Sometimes the device starts to create this malfunction just to force you to update the firmware.
So, the following are the steps to update your firmware:
- Download the application on your phone.
- Connect your speaker with this app.
- Open the application and see in the settings if the new version is available.
- Download the new version of the software and install it now.
- Your speaker will take several seconds to restart.
- The software of your speaker has been updated.
5. Circuit Board
The circuit board is like the brain of the device. It controls every action of your speaker. The problem can also be with this part.
This is the most sensitive part of your speaker. If the problem is with this, you can be in trouble. Take the tour speaker to the technician for fixation.
Do not try to fix this by yourself because it has a very complex structure that is only understandable by an experienced technician.
A little scratch or mishap can make your speaker dead. So, do not try to fix it by yourself. Take your speaker to the JBL support or any technical person.
How Do I Know That My Speaker is Not Fully Charged
You can know this by seeing the color of your charging light. Thus the question is very common. People are concerned that we cannot see the battery percentage of the speaker, how do we know whether the speaker is fully charged or not?
The light of the speaker has three colors: red, yellow, and green or white. The red color shows that the battery is below 30%.
The yellow color of the battery light shows that the charging is between 40 to 70% and the green light shows that the battery is over 70%.
The white light shows your speaker is fully charged. So, through these colors, you can easily tell how much battery percentage your speaker has.
Final Thoughts
There can be several reasons why JBL Speaker is Not Charging Fully To troubleshoot the problem, try
- Replacing the charging cable
- Replacing the battery
- Resetting the speaker
- Updating the software
- Taking the speaker to a technician if the problem is with the circuit board.
How long do JBL batteries last?
According to the information provided, JBL batteries last for up to 12 hours of playtime. This is based on the built-in 3000mAh rechargeable Li-ion battery that is included with many of their products.
Keep in mind that the actual battery life may vary depending on various factors such as the volume level, type of device being used, and other usage patterns.
It is always a good idea to check the manufacturer’s recommendations and follow best practices for maximizing battery life.
Can you replace the battery in a JBL speaker?
Yes, you can replace the battery in a JBL speaker. Depending on the specific model of the speaker, the process may vary slightly.
However, most JBL speakers have a removable battery that can be accessed by removing a panel or unscrewing a cover on the bottom or back of the speaker. It is important to ensure that you are using the correct type of battery for your particular speaker and to follow any instructions provided by the manufacturer for replacing the battery.
It is also recommended to power off the speaker and disconnect it from any power source before attempting to replace the battery.
How long should I charge my JBL?
It really depends on the specific model of JBL you have, as well as the type of charging method you are using.
Generally, it is recommended to charge your JBL for at least 2-3 hours before use. However, if you are using a fast charging method, it may only take around 1 hour to fully charge your JBL.
It is always a good idea to refer to the user manual for your specific JBL model for more accurate charging time information.
JBL Xtreme 2 Speaker Not Charging (Fixed)