If your JBL Xtreme is not loud enough as many people have reported such a problem on multiple online forums then there could be multiple reasons for that problem.
These problems include a drained battery, faulty internal components, faulty tweeters or woofers, outdated firmware, and lastly incorrect settings.
All these problems require a stepwise approach to solve them. I have personal experience of getting into such problem and after a lot of research, I concluded how can I fix JBL Xtreme 2 not loud problem. Its troubleshooting involves a stepwise approach to minimize the cost.
In the coming sections, I will be discussing all the issues and their solutions.
Why is JBL Xtreme 2 Not Loud?
This problem encompasses several reasons such as the low battery, faulty speaker, old firmware which require an update, and incorrect device pairing.
These issues can be fixed by performing a hard reset and firmware update of JBL Xtreme 2 which will solve the JBL Xtreme 2 not loud issue. If that does not work then a repair or return will be the only solution left.
1. Drained Battery:
The battery is a crucial component for the proper functioning of the JBL Xtreme 2. If the battery is not fully charged or it is low then this could cause a problem with your listening experience.
JBL Xtreme 2 might not be able to provide full volume in the low battery state. As the speaker including its tweeters and woofers draws significant power from the battery source.
A low battery will not be able to provide enough juice for the full volume. This could then lead to problems such as why is JBL Xtreme 2 not loud.
Solution:
You can solve this issue in simple steps.
- Check to see if your AC adapter is compatible with the speaker.
- Check if the charging cable is working fine by connecting it with another device first.
- Now plug the AC adapter into the wall socket and turn it on.
- Charge the speaker for about 2.5 hours to fully charge it.
Your problem of why is JBL Xtreme 2 not loud will be solved. If you are at no luck then continue reading the article for further solutions.
2. Try to Pair with Different Devices:
Sometimes connecting with a low-end device can significantly affect the output volume of the JBL Xtreme 2. Because the output frequency of the low-end device does not match with the JBL Xtreme 2. As a result, JBL Xtreme 2 volume become reduced.
Solution:
You can solve this issue by unbinding it from the previous device and pairing it again with any other high-end device.
3. Outdated Firmware:
JBL pushes regular streamlined updates to its products to make them free of any glitches and software bugs. However, no audio company is immune to these bugs.
Updates make the speakers bug-free. These updates can be installed by connecting the device to the JBL Connect app. Steps to update to the latest firmware of the JBL Xtreme 2 are described below.
Solution:
- Download and install JBL Connect App.
- Connect your JBL Xtreme 2 to the JBL Connect app.
- Go to the settings.
- Tap on the updates section.
- Check if the latest firmware is available.
- If available then download and install it.
- After installation, JBL Xtreme 2 will power up again and flashes the pairing lightly. It indicates that the speaker has been updated successfully.
4. Hard Reset of the JBL Xtreme 2:
If after updating to the latest firmware your problem of why is JBL Xtreme 2 not loud does not resolve then you can hard reset it.
Hard reset is one of the most useful functions of the JBL speakers which allows them to go back to the factory settings.
Doing this removes all the temporary bugs. JBL Xtreme 2 can be hard reset by using the simple and easy steps described below.
Solutions:
- The first step to hard reset the JBL Xtreme 2 is to power it on.
- After powering it on press and hold the Bluetooth button and the volume-up button for almost 8-10 seconds until the lights go off.
- After that, you should turn it on again by pressing and holding the power button for 3-4 seconds.
- After powering it on blue LED light will flash which indicates that your JBL Xtreme 2 is in pairing mode.
- Now, you can pair it with any device and your hard reset is complete at this point.
Note: I have got my problem solved by using this method and it is quite authentic among the users of JBL Xtreme 2.
5. Faulty Drivers of the JBL Xtreme 2:
JBL Xtreme 2 is not loud is also could be due to the fault of its drivers. These are the small speakers present inside the chassis of the JBL Xtreme 2 which produce high-frequency sounds which allow an immersive experience and loud sound.
Damaged drivers can significantly reduce the sound of the JBL Xtreme 2 and render it inoperable. To find out about the tweeter’s it must be troubleshot.
You can play high pitch and high-frequency sounds to check if the sound coming out of the speaker is distorted or muffled in any way.
There are several reasons for the JBL Xtreme 2 driver’s fault such as physical damage to its internal components by a hard drop on the floor, water damage to the speaker, and electrical damage which could occur due to the faulty power brick or voltage fluctuations.
If the drivers of the JBL Xtreme 2 are faulty then there will be a muffled and squeaky sound when you will listen by taking it close to your ears. If the tweeters are faulty then you could opt for one of the two solutions given below.
- Warranty Claim: if you have purchased the speaker recently then its warranty must be valid. You should go to claim it.
- Repair it from a local repair shop: if the warranty is no longer valid and the damage does not come under warranty, then you should go to the local but authentic repair shop to get the tweeter replaced.
Return JBL Xtreme 2 if No Luck:
If you have tried all the troubleshooting steps with no luck then you could consider returning your speaker if the warranty is valid.
If you have newly bought the speaker and it is malfunctioning even after changing your host device then you can replace the speaker by going to the customer care center with the original proof of purchase.
If some months have passed then you should check the purchase receipt and manufacturer’s website that if the warranty period provided by the manufacturer is still valid.
If yes, then the customer care center will cater to you and provide you with the new speaker or they will repair it for you without any cost.
But if the warranty is already expired then the only solution left is to get it repaired by the local repair center.
Conclusion:
There could be several reasons why is JBL Xtreme 2 not loud. These problems include a drained battery, outdated firmware, and an internal fault of the tweeters.
These issues can be fixed with simple and common troubleshooting tricks such as hard resetting, charging properly, and updating to the latest firmware available. But if nothing works for you then contacting the JBL support center is the only option left.
Is JBL Xtreme 2 loud enough for a party and event?
JBL Xtreme 2 is a popular speaker with immersive and enhanced sound quality. It comes with 4 drivers and 2 bass radiators which makes it a powerful choice for the party and events.
On the other hand, it has an option of JBL Connect+ by using this feature JBL Xtreme 2 can be linked with 100 nearby JBL Xtreme 2 speakers. With the massive battery, JBL Xtreme 2 is a considerable choice for parties and events.